Description
Overview
The most common point of failure for any fence line, pergola, or structural timber frame is at the ground level, where moisture rotting can destroy a 100mm wood post in just a few seasons. This Bulk Buy 5-Pack of Concrete-In U-Post Supports solves this issue by separating the wood from the wet earth. By setting the heavy-gauge steel stem into a concrete foundation pad, the load of your structure is transferred directly into the ground through clean engineering steel.
These brackets are built to handle the physical leverage forces caused by high winds hitting solid-clad fence panels. The pre-punched holes in the U-shoe provide clean alignment points for heavy-duty coach screws or timber bolts, pulling the wooden post into a tight, rigid fit that won’t loosen or sway over time.
Dimensions & Technical Product Matrix
| Structural Attribute | Engineering Specification |
| Pack Quantity | 5 x Complete Brackets (Bulk Special Offer Bundle) |
| U-Shoe Internal Width Options | Available in 75mm or 100mm (To fit standard square timber) |
| Material Base | Heavy-Gauge Structural Carbon Steel |
| Surface Finish | Hot-Dip Galvanized (Min 55-micron zinc coating layer) |
| Rebar Stem Length | 200 mm to 250 mm (Deep concrete embedment depth) |
| U-Shoe Steel Thickness | 4.0 mm Heavy-Duty Plate Steel |
| Fixing Hole Configuration | Pre-drilled multi-hole array (Fits M8 or M10 timber fixings) |
| Primary Structural Load | High-Load Vertical Downward & Lateral Wind Forces |
Application Guide
-
Fencing Profiles: Perfect for high-stress boundary lines, closeboard bays, and acoustic privacy fencing.
-
Garden Architecture: Designed to anchor heavy timber pergolas, garden arches, log stores, and gazebos.
-
Ground Frameworks: Ideal for elevating sub-frame timber joists for raised decking systems on uneven or sloping ground.
Contractor Installation & Structural Levelling Tip
Pro Tip: When setting multiple concrete-in post brackets along a run—like a new fence line or a 4-post pergola—getting all five brackets perfectly level and aligned before the concrete cures can be stressful.
The Trade Method: Do not try to level each bracket individually in its separate hole. Instead, build a simple, straight timber dummy rail out of cheap scrap wood. Clamp all 5 of your U-post brackets into the dummy rail at your exact spacing distances (e.g., 1.8-meter centers for fencing). Prop up and level the entire dummy rail assembly across your dug holes using stakes. Once the rail is level and in line, pour your concrete into all five holes around the stems at the same time. This keeps everything in place, preventing brackets from twisting or sinking as the concrete cures. Leave the dummy rail clamped on until the concrete hardens!







Reviews
There are no reviews yet