Description
6ft x 6ft Timber Garden Trellis Panel | Heavy Duty Full Height Privacy Screening
Overview
Solid fence panels can sometimes make smaller gardens or courtyard patios feel boxed-in and dark. Our 6ft x 6ft Square Garden Trellis offers the ultimate design solution, establishing clear, full-height boundary security while keeping your outdoor space bright and airy. By allowing sunlight to pass cleanly through its uniform square matrix, it prevents deep shadows from stunting your flowerbeds while successfully buffering heavy, buffeting garden winds.
Milled exclusively from slow-grown, high-density softwood, these heavy-duty panels are built significantly tougher than flimsy interior lattice lattices. Every intersecting horizontal and vertical batten is securely pinned at its junction with rust-resistant fasteners. This cross-linked geometry minimizes panel rattle during heavy autumn storms and prevents the grid from pulling apart under the structural strain of dense, woody climbing vines.
Key Features
-
Robust Double-Sided Aesthetic: Features an identical, premium finish on both faces so you and your neighbors can enjoy a beautifully presented timber grain.
-
Rebated Structural Perimeter: The internal matrix ends are nested deeply inside the thick outer framing channels, eliminating raw, exposed end-grain cuts that trap rainwater.
-
Anti-Bleed Rust Protections: Assembled using hot-dipped galvanised or stainless steel hardware pins to completely eliminate ugly orange chemical run-off streaks down the timber.
-
Natural Landscape Blending: The soft, pale-green preservative tint matures naturally into a warm honey-brown wood tone before weathering into a classic silver-grey. It easily accepts exterior stains, paints, or timber oils.
Technical Specifications
| Attribute | Specification |
| Product Type | Full-Height Square Open-Mesh Fencing Trellis |
| Material Base | High-Grade, Responsibly Sourced European Softwood |
| Width | 6 Feet (1.83m) – Industry Standard |
| Height | 6 Feet (1.83m) |
| Internal Mesh Style | Traditional Square Opening Pattern |
| Treatment Grade | Pressure Treated (Green Tint) for High-Exposure Outdoor Longevity |
| Compatibility | Slotted Concrete Fence Posts, Standard 100mm Timber Fencing Posts |
Trade Installation & Plant Loading Advice
Pro Tip: Due to the large surface area of a 6ft x 6ft panel, a mature climbing plant like a climbing hydrangea or wisteria can add substantial weight and wind resistance over time.
The Professional Method: Always anchor this panel using heavy-duty structural supports. If you are fixing to timber posts, ensure you use minimum 100mm x 100mm (4″ x 4″) posts sunk at least 600mm into the ground with 1.5 to 2 bags of rapid-setting Postcrete. Secure the trellis to the inside face of the posts using stainless steel L-brackets or heavy-duty framing screws driven through the thick outer perimeter frame. Leave a clear 50mm gap between the bottom of the trellis frame and the soil layer—using a timber gravel board underneath will completely stop wet-earth moisture from wicking up into the lower framing.









Reviews
There are no reviews yet