Wooden Gates For Bucks, Berks, Herts & Oxon
Carry the massive weight of solid timber driveway gates, heavy garden entries, and stable doors effortlessly with our trade-rated Gate Hook & Band Hinges. Familiarly known as hinge-and-pin hardware, this heavy-duty system separates the structural gate strap from the frame-mounted pivot pin. By transferring immense downward leverage horizontally across the gate’s internal framing and vertically down a solid steel post plate, it completely eliminates the bowing, warping, and dropping common with lightweight hardware.
Industrial Hook & Pin System: Thick-gauge steel bands ride smoothly over solid vertical pins, delivering unmatched load capacity without bending under stress.
Lift-Off Maintenance Design: The two-part unattached configuration allows the gate leaf to be lifted completely off its pins for effortless painting, staining, or landscaping adjustments.
All-Weather Corrosion Defiance: Treated with a heavy, marine-grade protective coating designed to survive deep mud, road salt, seasonal frost, and driving rain.
Anti-Tamper Security Design: Features an integrated square punch-out hole at the front of the strap to house an anti-vandal security coach bolt, preventing external unbolting.
Collection / Delivery Allow 3-5 days
Price range: £31.40 through £87.10 + VAT
Standard surface-mounted hinges can easily warp or shear when forced to carry wide, heavy external timber gates. Our structural Gate Hook & Band Hinges provide the definitive trade solution for high-load residential and agricultural boundaries. Because the long steel straps bridge multiple timber seams, they act as an exterior structural skeleton that reinforces your woodwork against high-frequency slamming and heavy wind shear.
Whether you are hanging a set of grand double driveway gates, a chunky cottage side gate, or outbuilding stable doors, these hook and band hinges provide a fluid, silent opening arc that handles thousands of continuous swing cycles without failing.
High-Leverage Structural Straps: Distributes the gate’s deadweight far across its horizontal frame rails, significantly reducing localized pull on individual fixing screws.
Robust Square Hook Plates: The heavy-duty pin plates mount perfectly flush onto timber fence posts, masonry brick pillars, or concrete structural frames.
Anti-Bleed Protective Shield: Premium surface processing stops ugly orange rust run-off from bleeding down and permanently staining your expensive treated timber panels.
Intruder-Resistant Fastening: Includes a dedicated square coach bolt hole that locks the carriage bolt head in place, making it impossible for intruders to unscrew the hinges from the outside.
| Attribute | Specification |
| Product Type | Heavy-Duty Hook and Band Hinges (Hinge & Pin) |
| Pack Quantity | Supplied as a Complete Pair (2x Straps & 2x Hook Plates) |
| Material Base | High-Tensile Forged Structural Steel |
| Finish Options | Weatherproof Hot-Dipped Galvanised Zinc / Matte Epoxy Black Powder Coat |
| Configurations Available | Standard Straight / Cranked (Flush Fit) / Adjustable Eye Models |
| Suitability | Double Driveway Gates, Heavy Garden Gates, Stable Doors, Garages, Barns, Field Gates |
| Fixings Included | No |
Pro Tip 1 (Anti-Theft): To stop opportunistic thieves from simply lifting your closed gate off its pins and walking away, mount the top hook plate with the pin pointing downward and the bottom hook plate with the pin pointing upward. This interlocking setup permanently locks the gate leaf in position.
Pro Tip 2 (Sizing Guide): To guarantee structural stability, your hook and band strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. Always anchor the straps over the internal horizontal framing rails for maximum wood bite.
| Weight | 12 kg |
|---|---|
| Size (Length) | 12" (305mm), 18" (457mm), 24" (610mm), 30" (762mm), 36" (914mm) |
You must be logged in to post a review.
Reviews
There are no reviews yet