Designed for hanging gates, shed doors, etc.

Features

2 x Tee Hinges
Size – 12″ (300mm), 16″ (400mm), 18″ (450mm)
Countersunk Pre Drilled Holes
Fittings – Screws
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, Shed Doors, etc.

The post Perry Prepacked Pair of T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The Pair of Aylesbury Gates Medium T-Hinges (also known as Tee Hinges) offers the perfect balance of traditional charm and dependable structural support. Specifically designed for domestic garden gates, courtyard entries, and shed doors, these hinges provide the necessary leverage to keep medium-sized timber gates perfectly aligned.

Crafted from high-grade steel, the elongated strap fixes directly into the horizontal rails of your gate, anchoring the timber firmly to your fence posts or wall plates to resist warping and wind duress.

Key Features

• Sag Prevention Technology: The countersunk fixing holes along the strap allow for multiple secure attachment points across the gate’s structural framework, minimizing stress on the timber.

• Universal Fitting: Can be utilized on both left-hand and right-hand opening timber gates and doors.

• Advanced Corrosion Resistance: Coated in an outdoor-grade protective layer to prevent rust, peeling, and corrosion caused by rain and moisture.

• Classic Rustic Appeal: The timeless spearhead strap design adds an attractive, traditional finish to any cottage-style or modern wooden gate.

Technical Specifications

Hinge Selection Tip

Pro Tip: To ensure proper structural support, the strap length of your T-hinges should ideally cover between one-third and one-half of the total width of the gate leaf. For example, a 3-foot wide garden gate pairs perfectly with these medium-duty hinges. Always mount the hinges onto the horizontal braces (ledges) of the gate, never just onto the thin vertical cladding.

The post Pair of Aylesbury Gates Medium T-Hinges – Timber Gate Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Colour – BZP

Sizes – 3 inch, 4 inch, 5 inch, 6 inch

Dimensions  –

3 inch – 76mm length x 50mm opened  2mm thickness

4 inch – 101mm length x 58mm opened 2mm thickness

5 inch – 127mm length x 65mm opened 2mm thickness

6 inch – 152mm length x 75mm opened 2mm thickness

Type – 5050

The post Pair of Butt Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Suitable for posts 25mm – 50mm

Corrosion Free

Size – 90mm x 70mm

Max closing weight 25kg

The post Gatemate Standard Unsprung Gate Hinges – Heavy Duty Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Traditional steel gate springs are prone to rust, look unsightly, and lose their tension after a few cold winters. The Gatemate Self-Closing High-Performance Polymer Hinge Set modernizes outdoor safety. By embedding a fully adjustable, heavy-duty spring mechanism inside an attractive, UV-stabilized black composite casing, these hinges provide a permanent auto-close solution that remains entirely unaffected by freezing frosts, deep mud, or heavy rain.

The “without legs” flat-leaf design is highly favored by trade installers. Without fixing legs wrapping around the side of the wood, these hinges offer total mounting flexibility—making them ideal for flush-fitting pedestrian side gates, swimming pool perimeters, and domestic garden openings where safety and style must coexist.

Key Features

• Tool-Adjustable Torsion Core: Features an accessible adjustment point so you can adapt the closing swing velocity to counteract strong seasonal head-winds.

• Vertical Alignment Slots: Built with integrated adjusting slots on the mounting plates, allowing you to fine-tune the vertical level during or after installation as the timber settles.

• Sleek Hardware Cover Caps: Supplied with matching snap-on rubber blanking caps to hide the tension adjustment holes and screw heads, creating a premium, tamper-proof finish.

• Zero Bleeding or Staining: Unlike traditional metal ironmongery, these composite hinges completely eliminate ugly orange chemical running lines from bleeding down your treated timber.

Technical Specifications

Installation & Tension Tip

Pro Tip: Mount the hinges flat across the front seam of your gate and post while utilizing the built-in vertical slots to level the gate leaf perfectly. Once completely screwed down, use the provided tensioning hex tool to wind the internal spring clockwise. We recommend setting the top hinge 1 to 2 clicks tighter than the bottom hinge; this uneven spring load balance ensures a highly fluid, snapping closure action that effortlessly engages standard auto-catch or ring latches every single time.

The post Gatemate Self Closing Hinges Without Legs – Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Struggling to hold a heavy timber gate level while trying to space, measure, and screw down your hinges is a chore. The Gatemate Self-Closing Hinges With Legs eliminate this installation headache entirely. By integrating a structural 90-degree corner flange into both leaves of the hinge, the hardware squares itself against the timber faces instantly.

Once fixed, these alignment legs act as heavy-duty load brackets. Instead of relying solely on the shear strength of your screws, the physical corner lips absorb the impact of the slamming gate leaf. This makes them the ultimate trade-grade solution for heavy timber pedestrian gates, child safety zones, and commercial outdoor perimeters where failure is not an option.

Key Features

• Dual-Aspect Fixing Strength: Screws drive into both the front face and the inside edge of your timber timber rails, double-anchoring the hinge to prevent pulling or tearing over time.

• All-Weather Torsion Core: The fully embedded internal spring mechanism stays shielded from moisture, frost, and dust, outlasting traditional external steel gate springs.

• Aesthetic Hardware Cover Caps: Supplied with matching snap-on composite caps that conceal the fixing screw heads for a sleek, premium, and tamper-resistant finish.

• Zero Bleeding or Rust Stains: Unlike traditional metal gate hinges, this high-tech composite completely eliminates ugly orange rust lines from running down and ruining your beautiful treated timber.

Technical Specifications

Installation Tip

Pro Tip: Simply push the hinge firmly into the corner edge of your gate post and gate frame so the 90-degree alignment legs rest completely flat against the wood. Secure the side screws first; this will pull the front leaf perfectly flush against the face of the timber automatically. Always check that your post is plumb using a spirit level before drilling, and use the included snap-on safety caps to seal out dirt and finish the look.

The post Gatemate Fixed Spring Self Closing Hinges With Legs – Heavy Duty Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

By utilizing an extended horizontal tapering strap, these hinges bridge multiple timber cladding joints on the face of your gate. This wider footprint significantly reduces tension localized around the hinge pin, preventing the wood fibers from splitting or buckling under seasonal wind stress.

Key Features

• High-Leverage Support Strap: Spreads the rotational pulling force of the swinging gate panel across a wide surface area, keeping your gates squared up.

• Smooth Pivot Action: Features a tightly machined central hinge barrel with a heavy-duty pin that delivers a fluid, silent opening arc through thousands of cycles.

• Countersunk Fixing Layout: Precision-stamped screw locations ensure that all mounting fastener heads sit perfectly flat and flush against the hinge leaf for a premium, snag-free finish.

• Anti-Bleed Protection: Premium surface treatment prevents ugly orange rust chemical run-off from bleeding down and staining your beautiful pressure-treated timber panels.

Technical Specifications

Sizing & Installation Tip

Pro Tip: As a gold standard trade rule for choosing the correct hardware size, your T-hinge strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. When mounting them, always ensure you screw the long horizontal strap directly over the internal structural frame rails of the gate rather than just fastening into the thin vertical cladding or tongue-and-groove boards. This ensures your fasteners bite into solid structural timber for maximum hold.

The post Pair of Gatemate Medium T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Traditional timber 5-bar field gates are notoriously heavy and place immense structural strain on their supporting posts. Over time, ground shifting, seasonal moisture changes, and constant swinging can cause even the best installations to sag. The Field Gate Adjustable Hook on Plate Hinge Set solves this vulnerability completely.

By upgrading to an adjustable top strap, you eliminate the hassle of unhanging a heavy gate just to fix a dropping corner. A quick twist of the dual locking nuts allows you to pull the top of the gate back toward the post, maintaining a perfectly fluid, smooth-as-butter swing year after year.

Key Features

• Clamping Double Strap Design: The long top strap distributes the gate’s deadweight along the horizontal rail, anchoring through the timber with a heavy coach bolt for maximum shear strength.

• Anti-Theft Hook Configuration: By installing the bottom hook plate facing upward and the top hook plate facing downward, you create an interlocking anchor that makes it impossible for intruders to lift and steal the gate.

• All-Weather Shielding: The thick, hot-dipped galvanised coating prevents ugly orange rust running from bleeding down and staining your premium pressure-treated timber.

• Smooth High-Load Pivot: Heavy-duty 19mm pins ensure a rock-solid pivot point that easily handles high-traffic vehicle entryways and livestock pressure.

Technical Specifications

Installation & Adjustment Tip

Pro Tip: When mounting the square hook plates to a wooden post, ensure they are perfectly vertical using a spirit level. If your gate drops over time due to seasonal ground settling, don’t panic: simply loosen the inner nut on the top threaded eye-bolt, tighten the outer nut until the gate lifts back to a perfectly level position, and lock the inner nut back down tightly against the strap.

The post Field Gate Hinge Set – Adjustable Hook On Plate for Timber Gates first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Outdoor timber gates and utility sheds face brutal operating conditions—confronting driving rain, freezing winter frost, and heavy wind leverage. Standard square butt hinges focus all of a gate’s deadweight onto a narrow sliver of wood, often causing the frame to warp or sag over time. Our structural Gate T-Hinges provide the definitive solution for lightweight to heavy-duty domestic gates.

By welding a long, tapering horizontal strap onto a secure vertical frame plate, these hinges distribute structural tension evenly across a much larger surface area. This ensures that your side gates, log stores, and garden doors maintain a smooth, parallel opening arc year after year without dragging on the ground.

Key Features

• Structural Load Distribution: The long steel arm acts as a solid mechanical brace across your gate stiles, binding the vertical tongue-and-groove cladding tightly to the internal framework.

• Heavy-Duty Machined Barrel: Built around a tightly engineered central pivot pin that delivers a smooth, fluid, and squeak-free swing through thousands of closing cycles.

• Anti-Bleed Corrosion Shield: Advanced weatherproofing treatments stop unsightly orange rust run-off from bleeding down and permanently staining your premium pressure-treated timber.

• Multi-Size Versatility: Available in a full range of lengths to accommodate everything from a small backyard wood store door to a tall pedestrian privacy gate.

Technical Specifications

Trade Sizing & Installation Rule

Pro Tip: To guarantee your gate never sags, your T-hinge strap length should always extend across one-third to one-half of the total width of the gate leaf it is holding. When mounting, always align the horizontal strap directly over the internal horizontal structural rails of the gate rather than screwing solely into thin vertical cladding boards. This gives your fasteners maximum structural bite into solid timber.

The post Gate T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Standard surface-mounted hinges can easily warp or shear when forced to carry wide, heavy external timber gates. Our structural Gate Hook & Band Hinges provide the definitive trade solution for high-load residential and agricultural boundaries. Because the long steel straps bridge multiple timber seams, they act as an exterior structural skeleton that reinforces your woodwork against high-frequency slamming and heavy wind shear.

Whether you are hanging a set of grand double driveway gates, a chunky cottage side gate, or outbuilding stable doors, these hook and band hinges provide a fluid, silent opening arc that handles thousands of continuous swing cycles without failing.

Key Features

• High-Leverage Structural Straps: Distributes the gate’s deadweight far across its horizontal frame rails, significantly reducing localized pull on individual fixing screws.

• Robust Square Hook Plates: The heavy-duty pin plates mount perfectly flush onto timber fence posts, masonry brick pillars, or concrete structural frames.

• Anti-Bleed Protective Shield: Premium surface processing stops ugly orange rust run-off from bleeding down and permanently staining your expensive treated timber panels.

• Intruder-Resistant Fastening: Includes a dedicated square coach bolt hole that locks the carriage bolt head in place, making it impossible for intruders to unscrew the hinges from the outside.

Technical Specifications

Trade Installation & Security Tips

Pro Tip 1 (Anti-Theft): To stop opportunistic thieves from simply lifting your closed gate off its pins and walking away, mount the top hook plate with the pin pointing downward and the bottom hook plate with the pin pointing upward. This interlocking setup permanently locks the gate leaf in position.

Pro Tip 2 (Sizing Guide): To guarantee structural stability, your hook and band strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. Always anchor the straps over the internal horizontal framing rails for maximum wood bite.

The post Gate Hook & Band Hinges – Timber Gate Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.