• Ideal for timber doors or gates
• Key operates deadbolt from both sides
• Size: 150mm x 100mm 6″ x 4″
• Finish: Black

A cast set with oval shaped knobs that is hardwearing. Commonly used on shed doors, outhouses and gates, the spindle is adjustable and suits most doors and gates. Escutcheons are supplied with this set.

• Ideal for use on Rim and Mortice Locks
• Oval Knob
• Heavy duty cast iron
• Size: 55mm 2″
• Finish: Black

The post Double Handed Rim Lock & Cast Oval Knob Set – Traditional Timber Door Lock Combination first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

The post SPECIAL OFFER BULK BUY 5 x Timber Drive Screws 7mm (Pack of 10) first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The most common point of failure for any fence line, pergola, or structural timber frame is at the ground level, where moisture rotting can destroy a 100mm wood post in just a few seasons. This Bulk Buy 5-Pack of Concrete-In U-Post Supports solves this issue by separating the wood from the wet earth. By setting the heavy-gauge steel stem into a concrete foundation pad, the load of your structure is transferred directly into the ground through clean engineering steel.

These brackets are built to handle the physical leverage forces caused by high winds hitting solid-clad fence panels. The pre-punched holes in the U-shoe provide clean alignment points for heavy-duty coach screws or timber bolts, pulling the wooden post into a tight, rigid fit that won’t loosen or sway over time.

Dimensions & Technical Product Matrix

Application Guide

• Fencing Profiles: Perfect for high-stress boundary lines, closeboard bays, and acoustic privacy fencing.

• Garden Architecture: Designed to anchor heavy timber pergolas, garden arches, log stores, and gazebos.

• Ground Frameworks: Ideal for elevating sub-frame timber joists for raised decking systems on uneven or sloping ground.

Contractor Installation & Structural Levelling Tip

Pro Tip: When setting multiple concrete-in post brackets along a run—like a new fence line or a 4-post pergola—getting all five brackets perfectly level and aligned before the concrete cures can be stressful.

The Trade Method: Do not try to level each bracket individually in its separate hole. Instead, build a simple, straight timber dummy rail out of cheap scrap wood. Clamp all 5 of your U-post brackets into the dummy rail at your exact spacing distances (e.g., 1.8-meter centers for fencing). Prop up and level the entire dummy rail assembly across your dug holes using stakes. Once the rail is level and in line, pour your concrete into all five holes around the stems at the same time. This keeps everything in place, preventing brackets from twisting or sinking as the concrete cures. Leave the dummy rail clamped on until the concrete hardens!

The post 5 Pack Concrete-In U Post Support Brackets | Heavy-Duty Bulk Buy Special Offer first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Standard garden gate latches offer boundary privacy, but they do very little to stop determined intruders from slipping into your rear garden or side alleys. The Gatemate Euro Profile Long Throw Lock and Handle Set upgrades your external timber gates to the security standards of a premium residential front door.

By utilizing a professional, five-pin euro cylinder nestled within a heavy, weather-shielded casing, this lock drives a thick stainless steel deadbolt deep into your fence post or wall frame. The built-in handle trim creates an all-in-one access solution that looks exceptionally sleek, while the double-sided key entries mean you can easily lock up behind you when entering or leaving your property.

Key Features

• Extended Long Throw Deadbolt: The heavy-gauge stainless steel bolt extends significantly further than standard locks, accommodating natural seasonal wood movement and gate gaps without losing latch security.

• Dual-Sided Key Interlock: Ideal for main side alleys, shared courtyards, and front pedestrian entrances where you require key-controlled access from both entry paths.

• Anti-Drill & Anti-Pick Cylinder: The high-specification core mechanism is specifically engineered to resist common domestic lockpicking techniques and forced drill attacks.

• Industrial Weather Armor: The lock body is coated in a premium, UV-stable textured protective shroud that prevents internal jamming from freezing winter frost, grit, and driving rain.

Technical Specifications

Installation & Drilling Tip

Pro Tip: To achieve an absolute factory-perfect fit, clamp the lock body flat onto the internal face of your gate stile before drilling any holes. Mark out the exact center point for the cylinder hole. Use a sharp flat wood bit or hole saw to drill cleanly through the timber frame. To prevent unsightly wood splintering on the front face of your premium gate, drill from the inside until the pilot tip just breaks through the front skin, then switch to the outside to drill back through and finish the hole cleanly.

The post Gatemate Stainless Steel Euro Profile Lock – Double Locking & Handle Combination first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.