1 x Ring/Suffolk Latch

1 x Brenton Bolt

2 x  T Hinges Size 18″

All in a galvanised finish.

The post Perry Single Gate Kit – Easy Install Timber Gate Kit for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Designed for hanging gates, shed doors, etc.

Features

2 x Tee Hinges
Size – 12″ (300mm), 16″ (400mm), 18″ (450mm)
Countersunk Pre Drilled Holes
Fittings – Screws
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, Shed Doors, etc.

The post Perry Prepacked Pair of T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Premium Black Antique Finish

Sizes

18″

The post Old Hill Ironworks Fleur de Lys Tee Hinges – Pair of Decorative Timber Gate Hinges first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Premium Black Antique Finish

Sizes

12″, 15″ , 18″

The post Old Hill Ironworks Tudor Tee Hinges – Pair of Decorative Timber Gate Hinges first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The Pair of Aylesbury Gates Medium T-Hinges (also known as Tee Hinges) offers the perfect balance of traditional charm and dependable structural support. Specifically designed for domestic garden gates, courtyard entries, and shed doors, these hinges provide the necessary leverage to keep medium-sized timber gates perfectly aligned.

Crafted from high-grade steel, the elongated strap fixes directly into the horizontal rails of your gate, anchoring the timber firmly to your fence posts or wall plates to resist warping and wind duress.

Key Features

• Sag Prevention Technology: The countersunk fixing holes along the strap allow for multiple secure attachment points across the gate’s structural framework, minimizing stress on the timber.

• Universal Fitting: Can be utilized on both left-hand and right-hand opening timber gates and doors.

• Advanced Corrosion Resistance: Coated in an outdoor-grade protective layer to prevent rust, peeling, and corrosion caused by rain and moisture.

• Classic Rustic Appeal: The timeless spearhead strap design adds an attractive, traditional finish to any cottage-style or modern wooden gate.

Technical Specifications

Hinge Selection Tip

Pro Tip: To ensure proper structural support, the strap length of your T-hinges should ideally cover between one-third and one-half of the total width of the gate leaf. For example, a 3-foot wide garden gate pairs perfectly with these medium-duty hinges. Always mount the hinges onto the horizontal braces (ledges) of the gate, never just onto the thin vertical cladding.

The post Pair of Aylesbury Gates Medium T-Hinges – Timber Gate Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Buying gate ironmongery piece-by-piece can easily lead to mismatched sizes, missing fasteners, or mismatched styles. The Gatemate Single Gate Kit solves this beautifully by supplying a cohesive, structurally matched hardware suite in a single heavy-duty box. Engineered specifically for standard single timber gates, this kit marries the effortless installation of surface-mounted Tee hinges with the timeless, clean functionality of a plain ring gate latch.

Whether you are a professional fencing contractor looking to speed up turnaround times or a homeowner tackling a weekend garden upgrade, this kit ensures a smooth, rattle-free installation that stands up to heavy daily use and seasonal weather shifts.

Key Features

• High-Leverage Tee Hinges: The extended horizontal strap bridges multiple timber seams on your gate face, reinforcing the frame and preventing sagging over time.

• Smooth-Action Closing Bar: The ring latch utilizes a weighted gravity-fall latch bar that snaps automatically into the frame keeper when the gate is pushed shut.

• Sleek Plain Handle Profile: The plain, unadorned ring handle offers a clean, understated aesthetic that complements both traditional and contemporary timber gates.

• Stain-Free Longevity: The high-specification protective wash completely stops ugly orange rust run-off, protecting your premium pressure-treated timber gates from unsightly staining.

Technical Specifications

Installation & Alignment Tip

Pro Tip: When setting out your gate hardware, always position the long horizontal strap of the Tee hinges directly over the internal structural face-rails of the gate rather than just the thin vertical cladding boards. For the ring latch, you will need to drill a clean hole through the gate stile to feed the central square spindle through. Ensure this hole is completely level so the inner and outer plain ring handles turn smoothly without binding against the wood.

The post Gatemate Single Gate Kit (Ring Gate Latch) – Timber Gate Kit for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

By utilizing an extended horizontal tapering strap, these hinges bridge multiple timber cladding joints on the face of your gate. This wider footprint significantly reduces tension localized around the hinge pin, preventing the wood fibers from splitting or buckling under seasonal wind stress.

Key Features

• High-Leverage Support Strap: Spreads the rotational pulling force of the swinging gate panel across a wide surface area, keeping your gates squared up.

• Smooth Pivot Action: Features a tightly machined central hinge barrel with a heavy-duty pin that delivers a fluid, silent opening arc through thousands of cycles.

• Countersunk Fixing Layout: Precision-stamped screw locations ensure that all mounting fastener heads sit perfectly flat and flush against the hinge leaf for a premium, snag-free finish.

• Anti-Bleed Protection: Premium surface treatment prevents ugly orange rust chemical run-off from bleeding down and staining your beautiful pressure-treated timber panels.

Technical Specifications

Sizing & Installation Tip

Pro Tip: As a gold standard trade rule for choosing the correct hardware size, your T-hinge strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. When mounting them, always ensure you screw the long horizontal strap directly over the internal structural frame rails of the gate rather than just fastening into the thin vertical cladding or tongue-and-groove boards. This ensures your fasteners bite into solid structural timber for maximum hold.

The post Pair of Gatemate Medium T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Outdoor timber gates and utility sheds face brutal operating conditions—confronting driving rain, freezing winter frost, and heavy wind leverage. Standard square butt hinges focus all of a gate’s deadweight onto a narrow sliver of wood, often causing the frame to warp or sag over time. Our structural Gate T-Hinges provide the definitive solution for lightweight to heavy-duty domestic gates.

By welding a long, tapering horizontal strap onto a secure vertical frame plate, these hinges distribute structural tension evenly across a much larger surface area. This ensures that your side gates, log stores, and garden doors maintain a smooth, parallel opening arc year after year without dragging on the ground.

Key Features

• Structural Load Distribution: The long steel arm acts as a solid mechanical brace across your gate stiles, binding the vertical tongue-and-groove cladding tightly to the internal framework.

• Heavy-Duty Machined Barrel: Built around a tightly engineered central pivot pin that delivers a smooth, fluid, and squeak-free swing through thousands of closing cycles.

• Anti-Bleed Corrosion Shield: Advanced weatherproofing treatments stop unsightly orange rust run-off from bleeding down and permanently staining your premium pressure-treated timber.

• Multi-Size Versatility: Available in a full range of lengths to accommodate everything from a small backyard wood store door to a tall pedestrian privacy gate.

Technical Specifications

Trade Sizing & Installation Rule

Pro Tip: To guarantee your gate never sags, your T-hinge strap length should always extend across one-third to one-half of the total width of the gate leaf it is holding. When mounting, always align the horizontal strap directly over the internal horizontal structural rails of the gate rather than screwing solely into thin vertical cladding boards. This gives your fasteners maximum structural bite into solid timber.

The post Gate T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.