Designed for hanging gates, shed doors, etc.

Features

2 x Tee Hinges
Size – 12″ (300mm), 16″ (400mm), 18″ (450mm)
Countersunk Pre Drilled Holes
Fittings – Screws
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, Shed Doors, etc.

The post Perry Prepacked Pair of T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

155mm 6″

Premium Black Antique Finish

The post Old Hill Ironworks Blacksmiths Straight Surface Bolt 155mm – Hand Forged Gate Bolt first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

152mm 6″

Premium Black Antique Finish

The post Old Hill Ironworks Cottage Ring Latch 152mm (6″) – Hand Forged Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Premium Black Antique Finish

Sizes

4″ , 6″ , 8″

The post Old Hill Ironworks Cabin Hooks – Hand Forged Wrought Iron Gate & Door Hooks first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

185mm x 40mm

Black Antique Finish

The post Old Hill Ironworks Lakeland Thumb Latch on Plate 185mm x 40mm – Hand Forged Gate Latch first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

203mm

Black Antique Finish

The post Old Hill Ironworks Fleur de Lys Thumb Latch 203mm – Hand Forged Decorative Gate Latch first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The Aylesbury Gates Cabin Hook (also known as a gate stay or wind hook) is a simple yet essential piece of outdoor hardware for any property. Large timber gates and garage doors act like sails in high winds; if left unsecured while open, they can violently slam shut, fracturing timber frames, shattering glass, or bending expensive hinges.

Crafted with a generous, deep-seated hook drop and a heavy-gauge mounting eye plate, this hardware ensures that once your gate is propped open, it stays open until you safely unhook it.

Key Features

• Deep-Drop Hook Security: Features an extra-deep curve on the hook end to ensure it cannot accidentally bounce out of the receiving eyelet during heavy gales.

• Solid Cast Steel Construction: Thick-gauge backplates distribute physical stress evenly into fence posts or masonry walls.

• Corrosion-Resistant Treatment: Coated in an outdoor-grade protective layer to eliminate rust streaks and prevent bleeding onto treated timber surfaces.

• Universal Surface Mount: Easily fastens horizontally or vertically to wood, brickwork, or concrete pillars.

Technical Specifications

Installation Tip

Pro Tip: For maximum stability, mount the cabin hook at shoulder height or near the top third of the gate leaf. When fixing the hook to a brick wall or post, ensure the arm is perfectly level with the receiving eyelet when engaged. Leaving a very small amount of tension (pulling the gate tight against the hook) will prevent the gate from rattling when the wind blows.

The post Aylesbury Gates Cabin Hooks – Timber Gate & Door Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Standard surface-mounted hinges can easily warp or shear when forced to carry wide, heavy external timber gates. Our structural Gate Hook & Band Hinges provide the definitive trade solution for high-load residential and agricultural boundaries. Because the long steel straps bridge multiple timber seams, they act as an exterior structural skeleton that reinforces your woodwork against high-frequency slamming and heavy wind shear.

Whether you are hanging a set of grand double driveway gates, a chunky cottage side gate, or outbuilding stable doors, these hook and band hinges provide a fluid, silent opening arc that handles thousands of continuous swing cycles without failing.

Key Features

• High-Leverage Structural Straps: Distributes the gate’s deadweight far across its horizontal frame rails, significantly reducing localized pull on individual fixing screws.

• Robust Square Hook Plates: The heavy-duty pin plates mount perfectly flush onto timber fence posts, masonry brick pillars, or concrete structural frames.

• Anti-Bleed Protective Shield: Premium surface processing stops ugly orange rust run-off from bleeding down and permanently staining your expensive treated timber panels.

• Intruder-Resistant Fastening: Includes a dedicated square coach bolt hole that locks the carriage bolt head in place, making it impossible for intruders to unscrew the hinges from the outside.

Technical Specifications

Trade Installation & Security Tips

Pro Tip 1 (Anti-Theft): To stop opportunistic thieves from simply lifting your closed gate off its pins and walking away, mount the top hook plate with the pin pointing downward and the bottom hook plate with the pin pointing upward. This interlocking setup permanently locks the gate leaf in position.

Pro Tip 2 (Sizing Guide): To guarantee structural stability, your hook and band strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. Always anchor the straps over the internal horizontal framing rails for maximum wood bite.

The post Gate Hook & Band Hinges – Timber Gate Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.