Designed for hanging gates, shed doors, etc.

Features

2 x Tee Hinges
Size – 12″ (300mm), 16″ (400mm), 18″ (450mm)
Countersunk Pre Drilled Holes
Fittings – Screws
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, Shed Doors, etc.

The post Perry Prepacked Pair of T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

By utilizing an extended horizontal tapering strap, these hinges bridge multiple timber cladding joints on the face of your gate. This wider footprint significantly reduces tension localized around the hinge pin, preventing the wood fibers from splitting or buckling under seasonal wind stress.

Key Features

• High-Leverage Support Strap: Spreads the rotational pulling force of the swinging gate panel across a wide surface area, keeping your gates squared up.

• Smooth Pivot Action: Features a tightly machined central hinge barrel with a heavy-duty pin that delivers a fluid, silent opening arc through thousands of cycles.

• Countersunk Fixing Layout: Precision-stamped screw locations ensure that all mounting fastener heads sit perfectly flat and flush against the hinge leaf for a premium, snag-free finish.

• Anti-Bleed Protection: Premium surface treatment prevents ugly orange rust chemical run-off from bleeding down and staining your beautiful pressure-treated timber panels.

Technical Specifications

Sizing & Installation Tip

Pro Tip: As a gold standard trade rule for choosing the correct hardware size, your T-hinge strap length should always cover roughly one-third to one-half of the total width of the gate leaf it is supporting. When mounting them, always ensure you screw the long horizontal strap directly over the internal structural frame rails of the gate rather than just fastening into the thin vertical cladding or tongue-and-groove boards. This ensures your fasteners bite into solid structural timber for maximum hold.

The post Pair of Gatemate Medium T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Outdoor timber gates and utility sheds face brutal operating conditions—confronting driving rain, freezing winter frost, and heavy wind leverage. Standard square butt hinges focus all of a gate’s deadweight onto a narrow sliver of wood, often causing the frame to warp or sag over time. Our structural Gate T-Hinges provide the definitive solution for lightweight to heavy-duty domestic gates.

By welding a long, tapering horizontal strap onto a secure vertical frame plate, these hinges distribute structural tension evenly across a much larger surface area. This ensures that your side gates, log stores, and garden doors maintain a smooth, parallel opening arc year after year without dragging on the ground.

Key Features

• Structural Load Distribution: The long steel arm acts as a solid mechanical brace across your gate stiles, binding the vertical tongue-and-groove cladding tightly to the internal framework.

• Heavy-Duty Machined Barrel: Built around a tightly engineered central pivot pin that delivers a smooth, fluid, and squeak-free swing through thousands of closing cycles.

• Anti-Bleed Corrosion Shield: Advanced weatherproofing treatments stop unsightly orange rust run-off from bleeding down and permanently staining your premium pressure-treated timber.

• Multi-Size Versatility: Available in a full range of lengths to accommodate everything from a small backyard wood store door to a tall pedestrian privacy gate.

Technical Specifications

Trade Sizing & Installation Rule

Pro Tip: To guarantee your gate never sags, your T-hinge strap length should always extend across one-third to one-half of the total width of the gate leaf it is holding. When mounting, always align the horizontal strap directly over the internal horizontal structural rails of the gate rather than screwing solely into thin vertical cladding boards. This gives your fasteners maximum structural bite into solid timber.

The post Gate T-Hinges – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.