Cabin Hooks Designed for Gates to hold them back on a hook plate

Features

Perrys Cabin Hook Galv
Hook Plate
Sizes – 6″ (150mm)
Fittings Included – Screws
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates

The post Perry Prepacked Wire Cabin Hooks – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Features

Perry Prepacked Gate Ring Latch
Size – 6″ (150mm)
Fittings Included – Screws
UK Delivery / Collection

Finish – Galvanised / Black

Handle Style – Plain/Twisted

Uses

Gates

The post Perry Prepacked Ring Gate Latch 6″ (150mm) – Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Gate auto catch, available in Galvanised and Black, ideal for small gates.

Fittings included – Screws

Size – 6″

The post Perry Prepacked Medium Auto Catches – Self Closing Timber Gate Catch first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Designed for gates, shed doors, doors, etc.

Features

Enclosed Tower Bolt
Size – 4″ (100mm), 6″ (150mm)
Countersunk Pre Drilled Holes
Fittings – Screws and Bolts
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, shed doors, doors, etc.

The post PERRY Pre-Packed Enclosed Tower Bolt – Timber Gate & Door Security Bolt first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

The post Prepacked Gate Spring – Timber Gate Self-Closing Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Designed for gates, shed doors, doors, etc.

Features

Brenton Bolt
Size – 4″ (100mm), 6″ (150mm)
Countersunk Pre Drilled Holes
Fittings – Screws and Bolts
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, shed doors, doors, etc.

The post PERRY Pre-Packed Medium Brenton Bolt – Timber Gate Locking Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Leaving an outdoor garden or side gate free to swing without a physical backstop is one of the leading causes of gate failure. When high winds catch a timber panel, the kinetic force can rip horizontal latches out of their screws, twist lock casings, and fracture the rear hinge knuckles. The Timber Gate & Door Stop Pack (2 Metres) offers a straightforward, professional trade solution.

By fixing these planed wooden slam strips vertically along the inside of your receiving post or wall plate, you create a seamless, integrated frame rebate. The gate leaf brings its weight flush against the entire length of the timber stop rather than focusing all its impact energy onto a single metal latch point.

Key Features

• Premium Planed All Round (PAR) Timber: Machined cleanly for a smooth finish with slightly eased edges to match high-end garden gates and architectural fencing.

• Impact Load Distribution: Spreads structural closing shock evenly across the full height of your gate post rather than stressing individual fixings.

• Anti-Rattle Buffer Zone: Provides a firm surface to pull your gate latch flush against, completely eliminating irritating wind rattling during winter gales.

• Pack of Two Versatility: Generous dual-strip pack allows you to create a matching double rebate on a pair of frames or secure multiple single gates across your property.

Technical Specifications

Installation Tip

Pro Tip: For a perfectly tuned fit, always hang your gate first and ensure it is fully latched shut. Position the timber stop strip flat against the post, pushing it firmly up until it rests gently flush against the indoor face of the closed gate leaf. Secure it into the post using high-quality exterior wood screws spaced every $300\text{mm}$ to $400\text{mm}$. For whisper-quiet operation, you can apply a strip of self-adhesive outdoor rubber foam tape down the face of the timber stop to act as a silent bumper.

The post Timber Gate Door Stop Pack 2 Metres – Wooden Gate & Door Stop Strip first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Double wooden gates look fantastic, but because they meet in the middle of a driveway without a central frame post to lock against, they are incredibly vulnerable to wind damage. Without a solid ground anchor, high winds can flex the timber, causing drop bolts to rattle out of position and placing immense leverage strain on your main hinge plates. Our Centre Gate Stop with 3 Legs is the definitive, trade-recommended ground brace for high-load residential and agricultural entrances.

Constructed from heavy-forged structural steel, this central stop is designed for permanent longevity. Once embedded in your driveway’s concrete threshold, the three-pronged anchor array works as a subterranean root system, distributing surface impacts evenly through the ground to create an unyielding closing barrier.

Key Features

• Triple-Anchor Sub-Structure: The three individual steel legs offer triple the surface adhesion of standard single-pin ground stops, completely resisting frost heaving or loose soil shifting.

• Universal Drop Bolt Target: Serves as the perfect central striking block to align your gates while providing a secure channel for vertical drop bolts or tower bolts to slide down behind.

• Anti-Bleed Corrosion Shield: Industrial hot-dipped galvanised plating prevents underground rot and surface rust bleeding, keeping your driveway threshold neat, clean, and stain-free.

• Heavy Vehicle Deflection: Engineered to withstand regular vehicle drive-overs without warping, buckling, or loosening from its concrete bed.

Technical Specifications

Trade Installation Tip

Pro Tip: To install the stop cleanly into an existing tarmac or concrete driveway, use a core drill to sink three neat holes, or excavate a small pocket roughly 150mm deep. Mix up a batch of rapid-setting structural mortar or epoxy resin grout, fill the cavity, and push the three legs down until the top strike plate sits level with your driveway surface (or up to 10mm proud, depending on your gate’s bottom ground clearance). Close your timber gates over the wet assembly to verify that the bottom rails rest perfectly flush against the vertical stop plate before the concrete cures.

Size – 5 Inch x 1.5 inch plate

Legs – 10mm x 4.5 inch long

The post Centre Gate Stop with 3 Legs – Timber Gate Hardware for Garden & Driveway first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Leaving a timber side gate or shed door unsecured while working in the garden is a recipe for damage. A single catching breeze can throw a heavy gate panel open, ripping out hinge screws or splitting the timber cladding entirely. Gatemate Heavy Duty Cabin Hooks offer an elegant, long-lasting trade solution to control your door sweeps.

Comprising a long, drop-down forged hook arm on a secure mounting plate and a separate independent eye loop, this hardware set installs flush onto wood, brick, or concrete surfaces. It serves as both an open-position holdback stay and a simple, decorative secondary latch for internal courtyard partitions or outbuildings.

Key Features

• Deep-Drop Hook Curvature: The end hook features a long, pronounced drop angle that seats deeply inside the eye loop, making it virtually impossible for wind vibrations to bounce the arm loose.

• Dual-Option Fixing Backplates: Engineered with wide-set screw patterns on both elements to maximize timber surface contact and prevent the hardware from pulling loose under load.

• Anti-Bleed Corrosion Wash: High-specification weatherproofing completely stops orange rust run-off, protecting your expensive pressure-treated timber gates from dirty chemical staining.

• Versatile Sizing Lineup: Available in multiple lengths to ensure you get the exact pivot clearance needed, whether pinning back a thick garden gate or a light window shutter.

Technical Specifications

Trade Layout & Installation Tip

Pro Tip: For a perfectly smooth action, mount the cabin hook plate onto the fixed wall or fence post, and fix the eye receiver onto the moving gate leaf. When positioning the two plates, always ensure the hook arm drops completely flat and level across the gap when engaged. If you are mounting a cabin hook to hold open a large, heavy driveway gate panel, install the hardware at roughly two-thirds of the gate’s total height—placing it higher up significantly increases its mechanical leverage against strong winds.

The post Gatemate Cabin Hooks – Timber Gate & Door Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Features

Gate Mate Gate Return Spring BZP / Black
Size – 10″ (250mm)
Fittings Included – Screws
UK Delivery / Collection
Finish – BZP / Black
Heavy Duty

Uses

Gates

The post Gatemate Return Spring 10″ (250mm) – Timber Gate Self-Closing Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.