Designed for gates, shed doors, doors, etc.

Features

Enclosed Tower Bolt
Size – 4″ (100mm), 6″ (150mm)
Countersunk Pre Drilled Holes
Fittings – Screws and Bolts
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, shed doors, doors, etc.

The post PERRY Pre-Packed Enclosed Tower Bolt – Timber Gate & Door Security Bolt first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Keep your large timber gates, garage doors, and stable entries firmly anchored with the Aylesbury Gates 18″ (450mm) Heavy Duty Drop Down Bolt. Engineered specifically for substantial wooden structures, this robust drop bolt provides the vertical rigidity needed to prevent heavy gates from warping, sagging, or blowing open in high winds.

Whether you are securing a pair of driveway gates or a commercial workshop door, this commercial-grade hardware ensures long-lasting, smooth operation.

Key Features

• Heavy-Duty Solid Steel Construction: Built to withstand high physical stress and daily impact from heavy timber gates.

• Generous 18-Inch (450mm) Length: Offers superior ground engagement, making it ideal for large driveway gates and garage doors with wider ground clearances.

• All-Weather Coating: Finished with a premium, rust-resistant protective layer to prevent corrosion from rain, snow, and road salt.

• Ergonomic Drop & Retain Design: Easy-to-grip handle lifts effortlessly and drops securely into place, with a retaining bracket to keep the bolt safely raised when the gate is in motion.

Technical Specifications

Installation Tip

Pro Tip: For double gates, install one drop down bolt on the passive gate leaf to securely anchor it into the ground, allowing your primary active gate to latch cleanly against it. For the best longevity, clear dirt and debris out of the ground socket or drop hole periodically.

The post Aylesbury Gates 18″ (450 mm) Drop Down Bolt – Heavy Duty Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Designed for gates, shed doors, doors, etc.

Features

Brenton Bolt
Size – 4″ (100mm), 6″ (150mm)
Countersunk Pre Drilled Holes
Fittings – Screws and Bolts
UK Delivery / Collection
Finish – Galvanised / Black
Heavy Duty

Uses

Gates, shed doors, doors, etc.

The post PERRY Pre-Packed Medium Brenton Bolt – Timber Gate Locking Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The Aylesbury Gates 6″ x ½″ (150mm x 12mm) Brenton Bolt (also known as a padbolt) delivers heavy-duty security for properties requiring restricted access. Ideal for medium-to-large timber gates, perimeter fencing, and outbuildings, this robust sliding bolt provides physical deterrence against forced entry.

Crafted with a thick, solid steel shoot and a heavy-gauge backplate, it effectively prevents heavy wooden gates from flexing or being pushed open under high winds or physical duress.

Key Features

• Robust Security Shoot: The $12\text{mm}$ diameter solid bolt slides cleanly into the keep, offering high shear strength against tampering.

• Padlock Loop Integration: Easily add a padlock to lock down your yard, shed, or driveway gates when you are away from home.

• Corrosion Protection: Advanced exterior-grade finish prevents rust, flaking, and corrosion from prolonged rain and moisture exposure.

• Flush or Recessed Fitting: Can be easily surface-mounted horizontally on gates or vertically on garage doors.

Technical Specifications

The post Aylesbury Gates 6″ x ½” (150 mm x 12 mm) Brenton Bolt – Heavy Duty Timber Gate Hardware first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

The Gatemate Spring Loaded Galvanised Bolt is the trade standard for environments demanding rugged dependability and rapid operation. Standard sliding tower bolts can easily vibrate open or be cleverly nudged loose by horses and livestock. This spring-loaded alternative solves that risk completely by maintaining continuous physical tension on the solid steel shoot, holding it firmly inside the keep until you manually pull back the lever.

Crafted from heavy-gauge forged steel, this animal bolt is explicitly built to tolerate the punishing forces of agricultural settings, shifting timber frames, and high-exposure outdoor weather.

Key Features

• High-Tension Steel Spring: The industrial-grade internal spring ensures a tight, vibration-resistant close, making it ideal for moving vehicles like stock trailers and horseboxes.

• Heavy Duty Solid Shoot: A thick steel deadbolt resists high impact and physical shearing forces from large animals bumping against the gate.

• Ultimate Corrosion Resistance: The thick hot-dipped galvanised finish shrugs off heavy rain, frost, and chemical corrosion common in farm yards and stables.

• Flexible Orientation: Can be surface-mounted horizontally on standard timber gate rails or vertically as a heavy-duty drop bolt.

Technical Specifications

Installation Tip

Pro Tip: When installing on a stable door or livestock gate, mount the bolt on the outside face of the door at a height animals cannot easily reach over. If using it as a slam-latch on a swinging gate, ensure the receiver keep is aligned perfectly straight; a tiny drop of lithium grease on the angled tip of the bolt shoot will allow it to retract and snap shut completely effortlessly when pushed closed.

The post Gatemate Spring Loaded Bolt Galvanised – Heavy Duty Gate Bolt for Timber Gates first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.

Overview

Standard decorative gate latches offer great daily convenience, but they provide virtually zero physical resistance against forced entry. Our structural Gate Brenton Bolt provides an ironclad mechanical barrier for your outdoor boundaries. By mounting completely flat across the face of your timber, this bolt acts as a rigid structural bridge that ties your moving gate leaf securely to its fixed fence post or masonry wall.

Manufactured to strict commercial trade specifications, our Brenton bolts feature precision-rolled cylindrical guide tracks. This guarantees that the solid steel pin slides freely without binding or jamming, even when your timber gates naturally expand, contract, or swell during wet winter months.

Key Features

• Intruder-Resistant Fastening: The dedicated square coach bolt punch-out allows you to pass a carriage bolt completely through the gate frame, making it impossible to unscrew the lock from the outside.

• Anti-Bleed Corrosion Shield: Advanced weatherproofing treatments stop ugly orange rust run-off from bleeding down and permanently staining your premium pressure-treated wood.

• Universal Handing Layout: The symmetrical face-mount design can be installed completely flush horizontally for left-handed or right-handed opening gates, or vertically as a heavy-duty drop bolt.

• Comprehensive Sizing Range: Available in a full lineup of lengths to accommodate everything from a light backyard bin store to massive, solid-core timber driveway gates.

Technical Specifications

Trade Installation & Security Tip

Pro Tip: To maximize your property’s perimeter security, always install a heavy-duty structural coach bolt through the square punch-out hole located on the main backplate. This requires drilling a clean hole entirely through your gate stile and tightening a washer and nut securely from the inside face of the property. This simple trade step ensures that even if an opportunistic intruder completely removes the exposed exterior wood screws with a screwdriver, the main bolt housing remains permanently locked to the frame timber and cannot be pried free.

The post Gate Brenton Bolt – Heavy Duty Timber Gate Locking Bolt first appeared on Wooden Gates for Bucks, Berks, Herts & Oxon.